Your Guide to Standard Window and Door Sizes in Calgary

Upgrading the design on your windows and doors can be a great way to modernize your home, essentially giving it a facelift. In addition to aesthetics, newer windows increase your insulation, drastically cutting down on energy bills!

But before you jump head first into the fun stuff like design options, it’s important to know what size you’re going to need. After all, there is an overwhelming variety of options out there, and there’s no point getting your heart set of a particular design if it won’t fit your space.

Lucky for you, the team at Window Mart has put together a handy guide on the standard Canadian window and door sizes to make shopping for your new windows and doors Calgary a breeze!

Standard Canadian Window Profiles

Though window styles can vary greatly, most homes are equipped with windows that are standardized to fit certain popular sizes. Before doing anything else, measure the windows you’re wanting to replace in your Calgary home. Though some occasionally run into a non-standard size, you will likely find that your windows match one of the following standards.

Standard dimensions and glazing options for fixed picture windows are as follows:

Dimensions (In) Low Profile Glazing Dimension (1.5in frame) High Profile Glazing Dimension (3in frame) Surface Area Low vs. High (In2) Percentage Difference
24×12 21×91/8 181/16×61/16 191.63 vs. 111.76 71%
24×24 21×211/8 181/16×181/16 443.63 vs. 328.51 35%
24×48 21×451/8 181/16×421/16 947.63 vs. 762.01 24%
48×48 45×451/8 421/16×421/16 2030.63 vs. 1774.51 14%
72×48 69×451/8 661/16×421/16 3113.63 vs. 2787.01 12%  

Some alternate styles, such as awning or casement windows, will have different measurements.

Standard widths can range from 36” to 78”. Heights can vary even more, from 48” to the extra-tall 80” window. On occasion, however, custom windows may be used instead of standardized styles in order to achieve a certain aesthetic. 

Bear in mind, a poorly fitted and installed window or door may not be noticeable to the naked eye. Your wallet, however, will notice due to higher energy bills. Badly fitted windows could also decrease your property value. This is why it’s always a good idea to choose a trustworthy and professional window and door provider like Window Mart.

A few other handy window terms to get acquainted with

Casing: Casing is the plain or intricately designed trim around your windows. Casing dimensions can vary by manufacturer, but typically vinyl casings are 3 ⅜” or 2 ⅝” and rounded windows are almost always 2 ⅝”.

Brickmould: Brickmold is what moulds your windows to your home and is paramount to assuring your windows are secure, air-tight, and energy efficient. It’s usually best to select a brickmould strip that matches the brickmould on your current windows.

Jamb Extensions: Jamb extensions help cover rough openings created when connecting your window to the casing. Their size depends on the width of the windows and wall construction.

Canadian Regulations

Another key point to remember when selecting new windows for your home in Calgary is that your windows must comply with Canadian laws and regulations on a local and national level.

Below is an overview of size requirements. Further window and door sizing regulations for Calgary can be found here.

Door Sizing

Like your windows, most doors come in set standard sizes.

Exterior Doors: Often made from strong, durable materials.

  • 32″x80″x1 3/4”
  • 34″x80″x1 3/4”
  • 34″x82″x1 3/4”
  • 36”x80″x1 3/4”
  • 36″x84″x1 3/4”

Sliding Glass Doors: Typically used for patios and balconies, sliding glass doors provide a bright and welcoming environment.They are usually sized 6’8×6’, but custom sizes can be made to fit your space.

Interior Doors: Interior doors are often a standard height of 80” and thickness of 1 ⅜” and vary only in width.

  • 12″x80″x1 3/8”
  • 14″x80″x1 3/8”
  • 16″x80″x1 3/8”
  • 18″x80″x1 3/8”
  • 20″x80″x1 3/8”
  • 22″x80″x1 3/8”
  • 24″x80″x1 3/8”
  • 26″x80″x1 3/8”
  • 28″x80″x1 3/8”
  • 30″x80″x1 3/8”
  • 32″x80″x1 3/8”
  • 34″x80″x1 3/8”
  • 36″x80″x1 3/8”

Local Window Experts in Calgary Can Help

If you’re still feeling overwhelmed by sizes and options, why not enlist the help of the professionals at Window Mart? Windows are our passions and we look forward to helping you find the perfect windows for your Calgary home. Call Window Mart or visit us today!

Things You Should Understand About Vinyl Windows Whitby.

Vinyl windows Whitby are the most preferred window materials for most homeowners across the whole of Whitby. The reason is quite apparent; the material is more durable than the other common materials such as aluminium and steel. When compared to wooden materials, they require little maintenance.

To make sure that your windows remain in good condition to withstand the extreme weather in Whitby here we have listed some guidelines you should adhere to for general window maintenance and care. We recommend that you inspect your windows Whitby annually to make sure that every aspect of the window is functional. See this weblink for more insights.

Vinyl Windows Care and Maintenance

  1. Inspect The Window Screens

Ensure that you always keep an open eye on holes and scratches on your windows Whitby screens. Check for loose screws and tighten them. It is important to check and make sure that the tracks are sliding smoothly. If you find out that they are jamming, solve the problem immediately by vacuuming to make them clean, and then apply a lubricant.

  • Check The Glass And Sash.

Inspect whether there are cracks around the vertical and horizontal strips that hold the entire glass in place. Also, inspect for cracks in the glass. If you notice some fogginess on the glass, the reason could be that there is something that has affected the airtight seal on the window which contributes significantly to the energy efficiency properties of your window. If this is affected, your window stops to be energy efficient.

  • Weather-stripping.

This is another important aspect you should look at. Weather-stripping is the material that links joints of the frame of your window. It should not be discoloured, cracked or gummy. You should also make sure that there is no visible deterioration of the joints in any way, especially where the window is joined to the structure.

  • Drainage.

When inspecting your windows, make sure there is not wet spots or water building anywhere near the sill of the window. Water should be capable of draining easily through the “weep holes” in your window.

Make sure that the holes are clear from any clogs and if there is debris, remove them. You may require a certified windows Whitby expert to help you do this.

  • Cleaning and Maintenance.

Vinyl Whitby windows and doors are famous for their ease in cleaning. You just need a damp cloth to do this. For extensive cleaning, you can use a shampoo and mix it with water and then use a sponge for cleaning then rinse the windows using clean water.

  • Lubrication.

Windows are constructed with a variety of moving parts, and these parts must be lubricated regularly for smooth operation. When you see windows getting stuck when being opened, you should consider applying a lubricant to make it function as expected.

Easy Ways to Protect Your Home During a Home Renovation Project

This is the time of year when most homeowners begin thinking about all those renovation projects they’ve been putting off. It usually happens early in the year when we start looking back at all the things that we set out to accomplish but somehow never got to the previous year. It’s a time when we are tired of being closed in during the long winter months and are almost dreading spring cleaning. This year, it’s time to combine spring cleaning with that new kitchen you’ve been dreaming of but to make your task easier, why not combine the two? There are easy ways to protect your home to prevent difficult clean-ups while installing that new counter or painting the walls a cheery white. Here are some of those ways you can protect your home during a renovation project.

Royalty Free Photo

Move Whatever You Can Out of the Way

Just because you are renovating a kitchen, for example, doesn’t mean you will be buying all new appliances. It pays to move them as far out of the way as possible during the time of renovation. Furniture in any room being remodeled or renovated should be moved into other rooms, if possible, but at least move everything to an area that isn’t likely to get covered in sawdust or paint.

Cover Whatever You Can’t Move

Do you know just how many people don’t take the time to buy a sufficient number of dropcloths when undergoing a home renovation project? The sad truth is that this is something many homeowners fail to do. Not only will you need to protect furniture and appliances, but you will also need to protect that hardwood floor you just had resurfaced last year or the lovely brick fireplace in the living room that would be a pain to get paint spatters off if left uncovered.

Turn Off Electricity If Necessary

This is an especially important step in protecting your home if you will be replacing wall or ceiling panels. Don’t forget to cut power to rooms where you are likely to run into electrical wiring because one cut into a wire can cause you serious injury due to electrical shock. Cutting or nicking a wire can also cause a short that could spark an electrical fire, so even if you aren’t working on any electrical fixture, if there is a danger of cutting a wire, make sure there is no power going to that room.

When it comes to a home renovation project, it pays to protect anything that isn’t being worked on. From those hardwood floors to the appliances which would cost a small fortune to replace or repair, why add expenses you don’t need when you could prevent destruction or damage before commencing work? This is your home and you do want to bring it up to date or accomplish a whole new look. However, always protect any items or fixtures not being worked on so that when the job is done, everything can be set right again and you can enjoy the fruits of your labor.